-
Square steel cold drawn square steel hot rolled square steel 3-250mm
Square steel is a kind of material with various shapes, sizes and properties made of ingot, billet or steel by pressure processing. It can be divided into hot rolling and cold rolling; The side length of hot rolled square steel is 5-250mm, and that of cold drawn square steel is 3-100mm.
-
Hot dip galvanized steel pipe low pressure fluid pipeline Q235 A106 A53
Galvanized welded pipe is divided into hot galvanizing and cold galvanizing. The thickness of hot dip galvanizing layer, low cost of galvanizing, the surface is not very smooth. Oxygen blowing welded pipe: it is used for steelmaking and oxygen blowing. Generally, it is small diameter welded steel pipe with 8 specifications of 3 / 8-2 inch. It is made of 08, 10, 15, 20 or 195-q235 steel strip. In order to prevent corrosion, it has to be aluminized.
-
Flat Bar High Carbon Steel Flat Bar Mild Steel Flat Bar From China factory
Flat steel refers to steel 12-300 mm wide and 3-60 mm thick with rectangular section and slightly blunt edge. Flat steel can be finished steel, also can be used as welded pipe blank and thin slab for laminated sheet. The thickness is 8 ~ 50mm, the width is 150-625mm, the length is 5-15m, and the product specification span is dense, which can meet the needs of users. Instead of the medium plate, it can be directly welded without cutting.
-
Precision steel tube bright pipe high precision seamless steel pipe finishing rolling oil pipe
Precision steel pipe is a kind of high precision steel pipe material after cold drawing or hot rolling. Due to the advantages of no oxide layer on the inner and outer walls of precision steel pipe, no leakage under high pressure, high precision, high finish, no deformation during cold bending, no expansion, flattening and no crack, it is mainly used to produce pneumatic or hydraulic components, such as air cylinder or oil cylinder, which can be seamless pipe or welded pipe.
-
1045 S45C C45 45# Seamless steel tubes for structural purposes machining
No.45 steel is high quality carbon structural steel with low hardness and easy cutting. It is often used as template, pin and guide post in mould, but it needs heat treatment. Recommended heat treatment temperature: normalizing 850, quenching 840, tempering 600. The content of carbon (c) in its chemical composition is 0.42-0.50%, Si content is 0.17-0.37%, Mn content is 0.50-0.80%, Cr content is less than 0.25%.
-
1020 S20C 1C22 C22 Q235 20# A3Seamless steel tubes fluid seamless steel pipe
The carbon content of 20 steel is 0.2%, which belongs to high quality low carbon steel, cold extrusion, carburizing and hardening steel. The steel has low strength, good toughness, plasticity and weldability. The tensile strength is 253-500mpa and the elongation is ≥ 24%. The supply state is unheated, hardness ≤ 156hbs.
-
1020 S20C 1C22 C22 Q235 20# A3Seamless steel tubes for structural purposes
The carbon content of 20 steel is 0.2%, which belongs to high quality low carbon steel, cold extrusion, carburizing and hardening steel. The steel has low strength, good toughness, plasticity and weldability. The tensile strength is 253-500mpa and the elongation is ≥ 24%. The supply state is unheated, hardness ≤ 156hbs.
Shandong Huayi Metal Materials Co., Ltd.
- Email daisy_sdhygg@163.com
- Phone 86-15863538780
